Initialization has not been Performed (B2450)
The headlight leveling ECU assembly stores this DTC if initialization has not been performed after the ECU was replaced.
DTC No. | DTC Detecting Condition | Trouble Area |
|---|---|---|
B2450 |
Initialization of the headlight leveling ECU assembly has not been performed |
Headlight leveling ECU assembly |
PERFORM INITIALIZATION
(a) Perform initialization of the headlight leveling ECU assembly (See page
).
|
RECHECK FOR DTC
(a) Using the Techstream, recheck for DTCs.
Result | Proceed to |
|---|---|
DTC B2450 is not output. |
A |
DTC B2450 is output. |
B |
HINT:
If the headlight leveling ECU assembly stores DTC B2450 even though the ECU has been initialized, there may be a malfunction in the headlight leveling ECU assembly.
| A | ![]() | END |
| B | ![]() | REPLACE HEADLIGHT LEVELING ECU ASSEMBLY |
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.
.gif)
.gif)