Oil Sump

PROCEDURE

Diesel Engine Lubrication System Components 1 – drain plug; 2 – sealing washer; 3 – oil pan; 4 – oil pan bolt; 5 – oil pan gasket; 6 – oil pump pick-up; 7 – pick-up bolt; 8 – pick-up O-ring; 9 – oil pump cover; 10 – driven gear; 11 – oil pump housing; 12 – oil level dipstick; 13 – oil filler cap; 14 – oil pressure sensor; 15 – vacuum pump bolt; 16 – vacuum pump bracket; 17 – vacuum pump; 18 – vacuum pump gasket; 19 – vacuum and oil pump drive gear; 20 – oil filter bracket gasket; 21 – bracket bolt; 22 – oil filter bracket; 23 – oil cooler O-ring; 24 – oil cooler; 25 – oil cooler nut; 26 – oil filter; 27 – pump shaft; 28 – oil pump cover bolt; 29 – oil pump bolt

If the engine is removed from the vehicle, unscrew the oil pan bolts and remove the oil pan together with the gasket. If the engine is installed in the vehicle, remove the oil pan in the following order: PROCEDURE 1. Remove plug 1 and drain the oil from the engine. Install the plug and tighten to 30 N·m. 2. Apply the parking brake. 3. Raise the front of the vehicle with a jack and support it on stands. 4. Unscrew bolts 4 and remove oil pan 3 with gasket 5. Install the oil pan in reverse order. When installing the oil pan, replace gasket 5. Tighten bolts 4 in a crisscross pattern to 20 N·m.