Driver alert control

The Driver Alert Control (DAC) function is designed to help alert the driver to erratic behavior, e.g. if the driver is distracted or shows signs of fatigue.

The objective of the function is to detect slowly deteriorating driving behavior and is primarily intended to be used on major roads.

The function is not intended for use in city traffic. DAC is activated when the vehicle's speed exceeds 65 km/h and remains active as long as speeds are above 60 km/h.

Driver Alert Control detects the vehicle's position in the traffic lane.

A camera monitors the traffic lane's marker lines and compares the direction of the road with the driver's movements of the steering wheel.

The vehicle is moving erratically in a lane.

If driving behavior becomes considerably erratic, the driver will be alerted by this symbol in the instrument panel, an audible signal and the message Time for a break.

If the vehicle is equipped with Sensus Navigation* and the BREAK LOCATION GUIDANCE function is activated, suggestions will also be provided for suitable places to take a break.

The warning will be repeated after a short time if driving behavior does not improve.

* Option/accessory.

Activating or Deactivating Driver Alert Control

The Driver Alert Control (DAC) function can be activated or deactivated.

1. 1
   Tap Settings in the center display's Top view.
2. 2
   Select My Car IntelliSafe Driver Alert.
3. 3
   Select/deselect Driver alert to activate/deactivate the function.