Driver Support
Using Passing Assistance
In this manual: Driver Support
~1min read
Passing Assistance can be used with Adaptive Cruise Control* or Pilot Assist*. Several conditions must be met for Passing Assistance to be possible.
To activate Passing Assistance:
- Your vehicle must be following the vehicle ahead (target vehicle).
- your vehicle's current speed must be at least 70 km/h
- The set speed must be high enough to safely pass another vehicle.
To start Passing Assistance:
- Turn on the left turn signal.
- Passing Assistance will begin.
- the vehicle is approaching an exit in the same direction as passing would normally occur
- the vehicle ahead slows before your vehicle has had time to switch to the passing lane
- traffic in the passing lane slows down
Situations of this type can be avoided by temporarily putting Adaptive Cruise Control or Pilot Assist in standby mode.
* Option/accessory.
Test yourself
A quick Volvo XC90 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?