Park Assist camera location and field of view

The Park Assist Cameras (PAC¹) can display a 360° panoramic view as well as separate views for each of the four cameras: rear, front, left and right.

360 ° View*

The location of the cameras and their approximate fields of vision.

The 360° view function activates all Park Assist cameras and all four sides of the vehicle are shown in the center display at once to help the driver see what is around the vehicle while maneuvering at low speeds.

From the 360° view, each camera view can be activated separately:

• Tap the screen to select a camera view, for example in the area in front of/above the front camera.

The active cameras will be indicated by a camera symbol on the vehicle symbol in the center display.

If the vehicle is equipped with Park Assist*, the distance to detected obstacles will be illustrated by fields in different colors.

The cameras can be activated automatically or manually.

Rear

The rear camera is located above the license plate.

The rear camera shows the general area behind the vehicle. On certain models, part of the bumper and the towbar (if installed) may be visible.

Objects on the center display may appear slightly tilted. This is normal.

Front camera

The Park Assist Front camera is located in the grille.

The front camera can be useful when pulling out from areas with limited visibility, such as when pulling out of a garage. The front camera is active at speeds up to 25 km/h and is automatically turned off when the vehicle exceeds this speed.

If the vehicle does not reach a speed of 50 km/h and speed falls below 22 km/h within 1 minute after the front camera turns off, the camera will be reactivated.

Side cameras

The side cameras are located in the exterior mirrors.

The side cameras can show views along each side of the vehicle.

¹ Park Assist system

* Option/accessory.