Audi 80 Quiz
Exhaust System

Removing the clamp

In this manual: Exhaust System
Technical Description — 39Engines — 41Exhaust System — 13Cooling System — 28Fuel tank and fuel pump — 12Air Filter and Intake Ducts — 13Mono-Motronic Injection System — 18Digifant Injection System — 19KE-III-Jetronic Injection System — 35MPI and MPFI Injection Systems — 32Clutch — 11Transmission and Driveline — 21Suspension and Steering — 33Brake System — 41Anti-lock brake system — 8Wheels and Tires — 13Body Electrical System — 35Ignition System — 24Lighting — 14Signaling Devices — 7Instruments and Auxiliary Equipment — 54Heating and Ventilation — 7Body Components — 18Troubleshooting — 6Specifications — 13
~1min read

PROCEDURE

Before removing the clamp, note its installation position exactly: which way do the bolt heads point? Is the clamp installed horizontally or vertically?
Take care that the sealing gasket does not fall to the floor. Hard material may crack.

When installing, make sure the halves of the clamp fully cover the projections on the pipe ends.

Observe the installation position and tighten the connections to 25 N·m.

Test yourself

A quick Audi 80 quiz: every answer comes with an explanation and a link to the manual page.