Headrests

Head restraints are designed to reduce the risk of neck injury in a collision.

For maximum protection, move the head restraint up or down so that the top of the head restraint is level with the top of your ears.

Removing the head restraints or adjusting them incorrectly may result in serious head and neck injury in a collision.

To adjust the front and rear seat head restraints, raise or lower the head restraint while pressing the release button.

If it is necessary to remove a head restraint for any reason, do the following:

1. Pull the head restraint fully upward.

2. While pressing the release button, pull the head restraint out of the guide sleeves.

Before driving, install the head restraint and adjust it.

3. Before driving, install the head restraint in place and adjust it accordingly.

To tilt the front seat head restraints*,

1. Place the head restraint in the upright position, move it fully forward, and release.

2. Carefully move the head restraint forward until it is in the desired position.