Instrument panel and controls

Demisting/defrosting the rear window and exterior mirrors

~1min read

Pressing the buttonactivates
this function: when it is switched on, the LED on the buttonis shown.

This function has a timer and switches off automatically after 20 minutes.

To switch off the heating function early, press the button.

Note: do not stick labels on the inside of the heated rear window in the area of the heating elements, to avoid damage.

Adjusting the blower speed

For optimum ventilation of the passenger compartment, proceed as follows:

  • Fully open the central and side air vents;
  • Turn the pointer of knob a to the blue zone;
  • Set the pointer of knob c to the desired speed;
  • Turn the pointer of knob e toTurn;

  • Switch off recirculation mode (the LED on the buttondoes not light up).

Activating recirculation mode

Press the button: the
activation of the function is indicated by the LED on the button itself. It is recommended to activate recirculation mode in traffic jams or when driving through tunnels, to avoid the intake of heavily polluted outside air.

Prolonged use is not advisable, especially with several occupants and to prevent fogging of the windows.

Note: depending on the selected mode ("heating" or "cooling"), recirculation mode allows the desired conditions to be reached faster.

Activating recirculation mode should be avoided on rainy or cold days, as this would further increase window fogging.

Test yourself

A quick Fiat Bravo quiz: every answer comes with an explanation and a link to the manual page.