Charging Your Vehicle – Plug-in Hybrid Electric Vehicle (PHEV)
AC Charging
In this manual: Charging Your Vehicle – Plug-in Hybrid Electric Vehicle (PHEV)
11steps
~66min
3/5difficulty
Done 0 of 11
Connecting the Charging Cable
To charge the high-voltage battery:
- Shift the vehicle into Park (P).
- Press the center right edge of the driver side charge door, then release it to open the door.
- Insert the charging plug into the charge port on your vehicle. Make sure the latch clicks, confirming that the coupler is fully engaged.

- Make sure the cable confirmation feature activates. This indicates the start of a normal charging cycle. The charging status indicator lights each segment in turn from bottom to top, then top to bottom again.
- When using a charging station, follow the instructions on the charging station to start the charging process.

Charging Cable Lock

- Insert the lock through the hole in the charging plug button.
- Lock the padlock or combination lock.
Stopping Charging
- If you installed a lock or combination lock, remove it.
- Press the button on the charging coupler.
- While holding the button, remove the charging plug from the charge port.

- Press the center right edge to close the charge port door.
Test yourself
A quick Ford Escape quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?