Engine Mount. Removal and Installation

Special Service Tools / General Equipment

Removal

1. 1
   Remove the coolant recovery reservoir.
   Refer to: Coolant Recovery Reservoir (303-03B Engine Cooling - 1.6 L EcoBoost (132 kW/180 L PS) - Sigma, Removal and Installation).
2. 2
   Using a jack and a wood block, support the engine.
   Use general equipment: jack stand
   Use general equipment: wood block

   

3. 3
   1. Remove the nuts.

   2. Remove the bolts and the engine mount.

   

Installation

1. 1
   Tighten the engine mount studs.
   Torque: 89 lb-in (10 N·m)

   

2. 2
   1. Install the engine mount and nuts.
      Torque: 59 lb-ft (80 N·m)

   2. Install the bolts.
      Torque: 35 lb-ft (48 N·m)

   

3. 3
   Remove the jack and wood block.
   Use general equipment: jack stand
   Use general equipment: wood block

   

4. 4
   Install the coolant recovery reservoir.
   Refer to: Coolant Recovery Reservoir (303-03B Engine Cooling - 1.6 L EcoBoost (132 kW/180 L PS) - Sigma, Removal and Installation).