Front Turn Signal Lamp Bulb Replacement

1. If replacing the left bulb, start the engine, turn the steering wheel fully to the right, and turn off the engine. To replace the right bulb, turn the steering wheel to the left.

2. Using a flat-blade screwdriver, remove the two push-pin clips from the fender liner.

3. Remove the lower fender liner from the fender and bumper.

4. Turn the socket one-quarter turn counterclockwise and remove it.

5. Turn the socket with the burned-out bulb one-quarter turn counterclockwise and remove the socket together with the bulb.

6. Install the socket with the bulb into the headlamp housing.

Turn it clockwise to lock it in place.

7. Turn on the lights and check the new bulb.

8. Install the fender liner in place. Install the two push-pin clips. Press the center of each clip to lock it.