Front Fog Lamp Bulb Replacement (on certain vehicle versions)

Halogen bulbs are used in the vehicle's headlamps. When replacing a burned-out bulb, hold the new bulb only by its plastic base, do not touch the glass envelope with your fingers, and protect it from contact with hard objects. If fingerprints or grease get on the bulb glass, wipe it with a clean cloth dampened with alcohol.

WARNING

Halogen bulbs become very hot during operation.

Therefore, oil or dirt on the bulb glass may cause the bulb to overheat and fail quickly.

1. Remove the bolt with a wrench.

2. Carefully remove the fog lamp assembly from the bumper by pushing it outward.

3. To disconnect the bulb electrical connector, press the lock tab and pull the connector off the bulb socket.

4. Turn the bulb counterclockwise one-quarter turn and remove it.

5. Install the new bulb and turn it clockwise one-quarter turn to secure the bulb in position.

6. Insert the connector plug into the bulb electrical connector. Make sure the plug is fully seated.

7. Turn on the lights to check that the new bulb operates correctly.

8. Align the protrusion on the fog lamp assembly with the bumper, install the assembly, and then securely tighten the screw.