Hyundai Accent Quiz
DOHC Engines

Inspection

In this manual: DOHC Engines
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read

Timing Belt Pulleys and Tensioner Pulley

PROCEDURE

1. Inspect the camshaft and crankshaft pulleys, tensioner pulley and idler pulley for uneven wear, cracks and damage.

2. Проверьте легкость и плавность вращения ролика механизма натяжения и холостого

2. Check that the tensioner pulley and idler pulley rotate smoothly and freely, and that there is no abnormal noise during rotation.
Timing belt

Do not bend the timing belt sharply or change its direction of rotation. Do not allow oil or grease to contact the timing belt, as this will cause it to deteriorate.

PROCEDURE

1. Inspect the timing belt for damage, wear, delamination, and cracks on the teeth and tooth base, as well as defects on the edges and back side of the belt.

2. При наличии следующих дефектов, замените зубчатый ремень.

2. If any of the following defects are found, replace the timing belt.

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.