Hyundai Accent Quiz
DOHC Engines

Installation

In this manual: DOHC Engines
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read
1special tools

Before installation, clean all parts.
Apply a thin layer of engine oil to all sliding surfaces.

PROCEDURE

1. Используя специальное приспособление 09222-22001, установите маслоотражательный

1. Using the special service tool 09222-22001, install the valve stem seal.
2. Coat the valve stem with engine oil and install the valve. When installing the valve, do not apply excessive force to avoid damaging the valve stem seal.

3. Установите пружины и держатели пружин. Пружины необходимо устанавливать стороной,

3. Install the valve springs and spring retainers. The valve springs must be installed with the painted end facing the spring retainers.

4. Специальным приспособлением сожмите пружину. Установите сухари и снимите специальное

4. Using the special tool, compress the valve spring. Install the valve keepers and remove the special tool for compressing the valve spring.
5. Install the cylinder head.

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.