Hyundai Accent Quiz
DOHC Engines

Inspection

In this manual: DOHC Engines
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read

PROCEDURE

1. При установке убедитесь, что шатун и крышка шатуна соответствуют номеру цилиндра,

1. During installation, make sure the connecting rod and connecting rod cap match the cylinder number they are installed in. When installing a new connecting rod, make sure the marks indicating its position are on the same side as the marks on the other connecting rods.
2. Replace the connecting rod if both bearing surfaces are damaged. Also replace the connecting rod if the surface contacting the piston pin is worn or damaged.

3. Проверьте изгиб каждого шатуна. При необходимости, замените шатуны. Замену

3. Check each connecting rod for bend. Replace the connecting rods if necessary. Replace the connecting rod together with its cap.
Maximum connecting rod bend: 0.05 mm per 100 mm of length
Maximum connecting rod twist: 0.1 mm per 100 mm of length

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.