Smart Cruise Control Speed

Setting the Smart Cruise Control Speed

1. Press the button on the steering wheel to turn on the system. The Cruise ( ) indicator will illuminate.

2. Accelerate to the desired speed. The Smart Cruise Control speed can be set as follows:

• 30 km/h~180 km/h: When there is no vehicle ahead
• 0 km/h~180 km/h: When there is a vehicle ahead

3. Push the switch down (SET-). The set speed and the distance to the vehicle ahead will be displayed on the LCD.

4. Release the accelerator pedal. The set speed will be maintained automatically.

If a vehicle is ahead of you, your vehicle may decelerate to maintain the distance to the vehicle ahead.

On a steep hill, the vehicle speed may slightly decrease going uphill or increase going downhill.

Information

The vehicle speed may decrease on an uphill grade and increase on a downhill grade.

To Increase the Smart Cruise Control Set Speed

Perform any of the following procedures:

• Push the switch up (RES+) and release immediately. The set speed will increase by 1 mph (1 km/h) each time the switch is pushed up in this way.
• Push the switch up (RES+) and hold it. The set speed of the vehicle will increase by 5 mph (10 km/h). Release the switch at the desired speed.
• You can set the speed up to 110 mph (180 km/h).

CAUTION

Check the driving conditions before using the switch. The vehicle speed increases rapidly when the switch is pushed and held.

To Decrease the Smart Cruise Control Set Speed

Perform any of the following procedures:

• Push the switch down (SET-) and release immediately. The set speed will decrease by 1 mph (1 km/h) each time the switch is pushed down in this way.
• Push the switch down (SET-) and hold it. The set speed of the vehicle will decrease by 10 km/h. Release the switch at the desired speed.
• You can set the speed down to 20 mph (30 km/h).

To Temporarily Accelerate with Smart Cruise Control Engaged

If you want to temporarily accelerate while Smart Cruise Control is engaged, depress the accelerator pedal. The increased speed does not interfere with Smart Cruise Control operation or change the set speed.

To return to the set speed, remove your foot from the accelerator pedal.

If you push the switch down (SET-) while at a higher speed, the cruise speed will be set again by the pedal.

Information

Be careful when accelerating temporarily, because the speed is not controlled automatically at this time even if there is a vehicle ahead.