Kia Forte BD Quiz
Body Electrical System

Blind Spot Radar Switch

In this manual: Body Electrical System
General Information — 8Maintenance — 32Engine Mechanical System — 47Engine Electrical System — 17Emission Control System — 10Engine Control System/Fuel System — 32Clutch System — 11Manual Transmission — 11DCT (Dual Clutch Transmission) System — 16Drive Shaft and Axle — 8Suspension System — 26Steering — 9Restraints — 11Brake System — 27Body (Interior and Exterior) — 119Body Electrical System — 98Heating, Ventilation, and Air Conditioning — 27
7steps
~42min
2/5difficulty
Done 0 of 7

Circuit Diagrams

Wiring Diagram

Repair Procedures

Inspection

  1. Disconnect the BCW switch connector from the side safety switch.

  2. Turn on the BCW switch, then check the continuity between the terminals and the BCW switch connector.

Removal

  1. Disconnect the negative (-) battery terminal.

  2. Remove the airbag lower panel.

    (Refer to Body - "Under Cover Panel")

  3. Remove the side cover switch panel (A) after loosening the screws.

  4. Disconnect the side cover switch connector (A).

  5. Remove the side airbag switch assembly (A) from the switch panel.

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Kia Forte BD quiz: every answer comes with an explanation and a link to the manual page.