Body Electrical System
Blind Spot Radar Warning Indicator
In this manual: Body Electrical System
5steps
~30min
2/5difficulty
Done 0 of 5
Repair Procedures
Removal
Disconnect the negative (-) battery terminal.
Remove the mirror (A) in the direction shown in the illustration, using a (-) screwdriver.

Disconnect the heater connector (A) and the BCW indicator connector (B) from the mirror.

Installation
Install in the reverse order of removal.
Inspection
Remove the quadrant cover (A).

Make sure the mirror operates correctly, as shown in the table below.


Test yourself
A quick Kia Forte BD quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?