Windshield wiper and washer switch

Repair Procedures

Removal

1. Remove the multifunction switch.

   (Refer to Body Electrical System - "Multifunction Switch")

Installation

1. Install in the reverse order of removal.

Inspection

Multifunction Switch Inspection

1. Check the circuit continuity between the terminals in each switch position, as shown below.

   

   Switch	Switch Position	Switch Terminal	Resistance (Ω, ±3.5%)
   Wiper Switch	FOG	1-9	330
   	OFF		∞
   	Intermittent (AUTO)		800
   	LOW		1800
   	HIGH		5700
   Intermittent Wiper Volume	Level 1	7-9	330
   	Level 2		690
   	Level 3		1310
   	Level 4		2610
   	Level 5		7310

Diagnosis using KDS

1. 1

   In the body electrical system, faults can be quickly diagnosed using the Korean Diagnostic System (KDS).

   The Diagnostic System (KDS) provides the following information.

   1. Self-diagnosis: check for malfunction and diagnostic trouble code (DTC).

   2. Current Data: Check the system input/output status.

   3. Operation check: Check the operating status of the system.

   4. Special Function: Control of other functions, including parameter setting and zero point adjustment.

2. 2

   Select "Vehicle Model" and "Integrated Body Control Unit (IBU)" to inspect the vehicle using the tester.

3. 3

   Select the "Current Data" menu to view the current input/output data status.