The airbag system can be more quickly diagnosed for problems with the KDS (Refer to "DTC guide").
Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS. (Refer to DTC guide when fault code is found.)
Refer to the KDS screen for operating conditions and details.
Seat Belt Pretensioner (BPT) Description and Operation
Description
When a front or side collision, or rollover accident occurs, the seat Belt Pretensioner (BPT) winds the seat belt and prevents the driver's and front passenger's body from being leaned forward and collided with the interior parts of the vehicle.
Direct measuring the resistance of the seat Belt Pretensioner (BPT) module is very dangerous as it can cause the seat Belt Pretensioner (BPT) to deploy.
Seat Belt Pretensioner (BPT) Troubleshooting
Troubleshooting
Seat Belt Pretensioner (BPT) On Vehicle Inspection
On Vehicle Inspection
The airbag system can be more quickly diagnosed for problems with the KDS (Refer to "DTC guide").
Inspect the Diagnostic Trouble Code (DTC) with the KDS. (Refer to DTC guide when fault code is found.)
Refer to the KDS screen for operating conditions and details.
Seat Belt Pretensioner (BPT) Removal and Installation
Removal
Front Seat Belt Pretensioner (BPT)
After a collision, the seat belt is performs operation check and fault diagnosis, and when a problem occurs, a new product is replaced.
Disconnect the battery negative ( - ) terminal.
After disconnecting the battery negative ( - ) terminal, wait at least 3 minutes and 30 seconds.
Remove the center pillar upper trim. (Refer to Body - "Center Pillar Trim")
Disconnect the front seat belt pretensioner connector (A).
Remove the front seat belt (A) after removing the upper anchor bolt.
Tightening torque : 39.2 - 54 N·m
Remove the front seat belt pretensioner (A) after removing the bolts. Tightening torque Bolt (M6) : 7.8 - 11.8 N.m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb-ft) Bolt (7/16 inch) : 39.2 - 54 N·m
Rear Seat Belt Pretensioner (BPT)
After a collision, the seat belt is performs operation check and fault diagnosis, and when a problem occurs, a new product is replaced.
Disconnect the battery negative ( - ) terminal.
After disconnecting the battery negative ( - ) terminal, wait at least 3 minutes and 30 seconds.
Remove the luggage side trim. (Refer to Body - "Luggage Side Trim")
Disconnect the rear seat belt pretensioner connector (A).
Remove the rear seat belt (A) after removing the upper anchor bolt.
Tightening torque : 39.2 - 54 N·m
Remove the rear seat belt pretensioner (A) after removing the bolts. Tightening torque Bolt (M6) : 7.8 - 11.8 N.m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb-ft) Bolt (7/16 inch) : 39.2 - 54 N·m
Rear Center Seat Belt
After a collision, the seat belt is performs operation check and fault diagnosis, and when a problem occurs, a new product is replaced.
Remove the rear seat back assembly from the rear seat back frame. (Refer to Body - "Rear Seat Back Cover")
Remove the rear center seat belt (A) after removing the nut.
Installation
Install in reverse order of removal.
Be sure to keep the torque specifications presented in shop manuals. Otherwise, it could lead to the malfunction of airbag system.
Height Adjust Removal and Installation
Removal
Remove the center pillar upper trim. (Refer to Body - "Center Pillar Trim")
Remove the front seat belt (A) after removing the upper anchor bolt.
Tightening torque : 39.2 - 54 N·m
Remove the height adjust (A) after removing the bolts.
Tightening torque : 39.2 - 54 N·m
Installation
Install in reverse order of removal.
Seat Belt Reminder Removal and Installation
Removal
Front Seat Belt Buckle
Remove the front seat assembly. (Refer to Body - "Front Seat Assembly")
Remove the wiring mounting clip (A).
Remove the front seat belt buckle (A) after removing the screw and clip (B).
Tightening torque : 39.2 - 54 N·m
Remove the rear seat cushion assembly. (Refer to Body - "Rear Seat Assembly")
Disconnect the rear seat belt buckle connector (A). [LH] [RH]
Remove the rear seat belt buckle (A) after removing the bolt.