A/C Drive Belt

repair procedures

TEST

1. 1

   Inspect the drive belt for wear and damage. Replace if necessary.

2. 2

   Visually inspect the drive belts for excessive wear and damage.

   If any defects are found, replace the drive belt.

   

Removal and Installation

1. 1

   Remove the engine undercover.

   (Refer to Engine Mechanical - "Engine Under Cover")

2. 2

   Remove the drive belt.

   [Kappa 1.0 T-GDI]

   1. To loosen, turn the drive belt tensioner (A) clockwise, then remove the drive belt (B).

      

      

   [Kappa 1.2 MPa, 1.4 MPa]

   1. Turn the tensioner (A) clockwise with a wrench, then insert the stopper pin (B).

      

   2. Remove the poly-V belt (A).

      

   [1.6 NEW U TCI]

   1. To turn the tensioner, loosen the tensioner arm bolt (A). Turn the wrench clockwise so that the tensioner arm rotates.

      

   2. Remove the poly-V belt (A).

      

3. 3

   Installation is the reverse of removal.