Kia Stonic Quiz
Engine Mechanical

Oil Pump

In this manual: Engine Mechanical
General Information — 8Maintenance — 31Engine Mechanical — 49Engine Electrical — 15Emission control system — 11Engine Control System/Fuel System — 45Clutch System — 12Manual Transaxle System — 11DCT (Dual Clutch Transmission) System — 16Drive Shafts and Axles — 9Suspension — 16Steering — 10restraint system — 15Braking system — 22Body (Interior and Exterior) — 89Rear Seat — 16Electrical System — 25Electrochromic Interior Rear View Mirror — 64Heating, Ventilation, and Air Conditioning — 31
9steps
~54min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 9

repair procedures

expansion

  1. Remove the engine undercover.

    (Refer to Engine and Transaxle - "Under Hood")

  2. Drain the engine coolant.

    (Refer to Cooling System - "Engine Coolant")

  3. Disconnect the oil cooler lines (A).

  4. Remove the oil filter.

    (See Lubrication System - Engine Oil)

  5. Loosen the mounting screws (A) and remove the oil cooler assembly (B).

Installation

  1. Apply a thin coat of engine oil to the oil cooler gasket surface (A). Then install the oil cooler with the mounting bolt (B).

    Tightening torque: 44.1~54 N·m

  2. Apply a small amount of engine oil to the oil filter sealing surface, then install the oil filter.

    (See Lubrication System - Engine Oil)

  3. Connect the oil cooler coolant hoses (A).

  4. Fill the radiator with coolant and check for leaks.

Test yourself

A quick Kia Stonic quiz: every answer comes with an explanation and a link to the manual page.