Kia Stonic Quiz
Engine Mechanical

Oil Pan

In this manual: Engine Mechanical
General Information — 8Maintenance — 31Engine Mechanical — 49Engine Electrical — 15Emission control system — 11Engine Control System/Fuel System — 45Clutch System — 12Manual Transaxle System — 11DCT (Dual Clutch Transmission) System — 16Drive Shafts and Axles — 9Suspension — 16Steering — 10restraint system — 15Braking system — 22Body (Interior and Exterior) — 89Rear Seat — 16Electrical System — 25Electrochromic Interior Rear View Mirror — 64Heating, Ventilation, and Air Conditioning — 31
10steps
~65min
3/5difficulty
1special tools
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 10

Components and Components Location

COMPONENTS LOCATION

1. Oil filter 2. Oil pan

repair procedures

expansion

  1. Remove the engine undercover.

    (Refer to Engine and Transaxle - "Under Hood")

  2. Drain the engine oil.

    (See Lubrication System - Engine Oil)

  3. Remove the oil pan (A).

    Insert the special service tool (09215-3C000) between the ladder frame and the oil pan. Cut the gasket and remove the oil pan.

  4. Remove the oil filter (A).

Installation

  1. Install the oil filter (A).

    Tightening torque: 9.8 ~ 11.8 N·m

  2. Use a gasket scraper to completely remove the old gasket material from the gasket surfaces. Do not scratch the surfaces.

  3. Before installation, apply liquid sealant to the lower part of the oil pan.

    The part must be installed within 5 minutes after applying the sealant.

    Bead width: 3.0 ~ 4.0 mm. Sealant: TB1217H or LOCTITE 5900H.

  4. Install the oil pan (A).

    Tighten the bolts evenly in several steps.

    Tightening torque: 9.8 ~ 11.8 N·m

  5. Install the remaining parts in the reverse order of removal.

  6. Refill the engine oil.

    (See Lubrication System - Engine Oil)

Test yourself

A quick Kia Stonic quiz: every answer comes with an explanation and a link to the manual page.