Rear Washer Switch

Repair Procedures

INSPECTION

Überprüfung des Kombischalters

1. In den einzelnen Schalterpositionen zwischen den Klemmen wie unten gezeigt auf Durchgang prüfen.

   

   [Links]

   Switch	Switch position	Switch terminal	Wide resistance (Ohm, ±3.5%)
   Windshield wiper switch	Low	1,9	330
   	OFF		∞
   	Intermittent (AUTO)		800
   	Low		1.800
   	High		5.700
   Rear wiper switch	OFF	9-16	∞
   	Low		910
   	High		2.910

   
   

   [Rechtslenkung]

   Switch	Switch position	Switch terminal	Wide resistance (Ohm, ±3.5%)
   Windshield wiper switch	Low	3-16	330
   	OFF		∞
   	Intermittent (AUTO)		800
   	Low		1.800
   	High		5.700
   Rear wiper switch	OFF	9-16	∞
   	Low		910
   	High		2.910

Inspection (with KDS)

1. 1

   Defective body electrical components can be quickly checked with the Vehicle Diagnostic System (KDS).

   The Diagnostic System (KDS) provides the following data.

   1. Self-diagnosis: Check malfunction and diagnostic trouble code (DTC)

   2. Aktuelle Daten: Status der Ein-/Ausgangsdaten des Systems überprüfen

   3. Stellgliedtest: Betriebsbedingung des Systems überprüfen

   4. Additional functions: Control of other functions, including system option settings and zero point setting

2. 2

   Select 'Vehicle Model' and 'Body Control Module (BCM)' to diagnose the vehicle with the tester.

3. 3

   Select the 'Current Data' menu to check the current status of the input/output data.