Kia Optima DL3 Quiz
Body Electrical System

Hazard Warning Switch

In this manual: Body Electrical System
General Information — 8Advanced Driver Assistance System (ADAS) — 21Maintenance — 27Engine Mechanical System — 45Engine Electrical System — 11Emission Control System — 11Engine Control System/Fuel System — 25Automatic Transmission — 20Drive Shaft and Axle — 7Suspension System — 22Steering — 7Restraints — 11Brake System — 22Body (Interior and Exterior) — 116Body Electrical System — 90Heating, Ventilation, and Air Conditioning — 32
10steps
~60min
3/5difficulty
Done 0 of 10

Circuit Diagrams

Connector and Terminal Function

Repair Procedures

Removal

  1. Disconnect the negative battery cable.

  2. Remove the decorative trim [RH].

    (Refer to Body — Crash Pad Garnish)

  3. Remove the center ventilation vent garnish (A) after loosening the mounting screws.

  4. Disconnect the start/stop button connector (A) and the hazard switch connector (B).

  5. Remove the hazard warning switch (A) by releasing the hooks.

Installation

  1. Install in the reverse order of removal.

Inspection

  1. Disconnect the negative battery cable.

  2. Remove the decorative trim [RH].

    (Refer to Body — Crash Pad Garnish)

  3. Remove the center ventilation vent garnish (A) after loosening the mounting screws.

  4. Disconnect the start/stop button connector (A) and the hazard switch connector (B).

  5. Check the circuit between the terminals for continuity.

Test yourself

A quick Kia Optima DL3 quiz: every answer comes with an explanation and a link to the manual page.