Kia Optima DL3 Quiz
Body Electrical System

Mood Lamp Unit

In this manual: Body Electrical System
General Information — 8Advanced Driver Assistance System (ADAS) — 21Maintenance — 27Engine Mechanical System — 45Engine Electrical System — 11Emission Control System — 11Engine Control System/Fuel System — 25Automatic Transmission — 20Drive Shaft and Axle — 7Suspension System — 22Steering — 7Restraints — 11Brake System — 22Body (Interior and Exterior) — 116Body Electrical System — 90Heating, Ventilation, and Air Conditioning — 32
8steps
~48min
2/5difficulty
Done 0 of 8

Circuit Diagrams

Connector and Terminal Function

Repair Procedures

Removal

  1. Disconnect the negative battery cable.

  2. Remove the airbag lower panel.

    (Refer to Body - "Under Cover Panel")

  3. Remove the crash pad garnish [LH].

    (Refer to Body — Crash Pad Garnish)

  4. Remove the lower crash pad garnish [LH] (A) by loosening the screws.

  5. Disconnect the connector (A) from the lower side airbag cover [LH].

  6. Remove the side ventilation grille (A) using a flat-tip screwdriver or a removal tool.

  7. Disconnect the mood lamp unit connector (A).

  8. Remove the mood lamp unit (A) by loosening the mounting nuts.

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Kia Optima DL3 quiz: every answer comes with an explanation and a link to the manual page.