Body Electrical System

Overhead Console Lamp

5steps
~30min
2/5difficulty
Done 0 of 5

Repair Procedures

Inspection

  1. Remove the map lamp assembly, then check continuity between the terminals. If continuity is not as specified, replace the map lamp switch.

Removal

  1. Disconnect the negative (-) battery terminal.

  2. Remove the two mounting screws.

    Then remove the overhead console (A).

  3. Remove the overhead console after disconnecting the connectors (A).

Installation

  1. Install the overhead console lamp after connecting the connector.

  2. Install the lens by tightening the 2 screws.

Test yourself

A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.