Transmission & Driveline

A/t Fluid Cooler Tube

8steps
~48min
3/5difficulty
Done 0 of 8

Exploded View

A/T assembly A/T fluid cooler tube assembly Bracket
Bracket A/T fluid cooler hose A A/T fluid cooler hose B
To A/T fluid cooler. Refer to Exploded View.
: Clip
: N·m (kg-m, in-lb)

Removal and Installation

REMOVAL

Remove front bumper. Refer to Exploded View.

Remove front under cover. Refer to Removal and Installation.

Drain A/T fluid. Refer to Draining.

Remove A/T fluid cooler hose A and B from A/T fluid cooler. Refer to Removal and Installation.

Remove A/T fluid cooler hose A and A/T fluid cooler hose B from A/T fluid cooler tube assembly using the following procedure:

  1. Remove A/T fluid cooler tube cap from A/T fluid cooler tube assembly .

  2. Install suitable disconnect tool (A) (commercial service tool) on to the A/T fluid cooler tube assembly at the A/T fluid cooler hose side.

  3. Rotate suitable disconnect tool (A) (commercial service tool) counter clockwise 60 degrees to release snap ring.

  4. Remove A/T fluid cooler tube from A/T fluid cooler hose.

Remove the water hose clip A and B from the A/T fluid cooler tube assembly bracket. Refer to Removal and Installation.

Remove A/T fluid cooler tube assembly mounting nut () and remove A/T fluid cooler tube assembly from bracket.

Remove A/T fluid cooler tube assembly mounting bolt () and remove A/T fluid cooler tube assembly from bracket.

Remove A/T fluid cooler tube assembly from A/T assembly using the following procedure:

  1. Remove A/T fluid cooler tube cap from A/T fluid cooler tube assembly .

  2. Install suitable disconnect tool (A) (commercial service tool) on to the A/T fluid cooler tube assembly at the A/T assembly side.

  3. Rotate suitable disconnect tool (A) (commercial service tool) counter clockwise 60 degrees to release snap ring.

  4. Remove A/T fluid cooler tube from A/T assembly.

Remove bracket mounting bolts () and remove bracket .

Remove bracket mounting bolt () and remove bracket .

INSTALLATION

  • Installation is in the reverse order of removal.

  • Fill A/T fluid after installation. Refer to Refilling.

Inspection and Adjustment

INSPECTION AFTER INSTALLATION

Check for A/T fluid leakage. Refer to Inspecton.

ADJUSTMENT AFTER INSTALLATION

Adjust A/T fluid level. Refer to Adjustment.