Transmission & Driveline
Additional Service When Replacing Electric Shift Selector
In this manual: Transmission & Driveline
4steps
~24min
2/5difficulty
Done 0 of 4
Description
When electric shift selector is replaced, always perform "Replace ECU" of CONSULT function to write vehicle specifications. For work procedure, refer to Work Procedure.
Work Procedure
WRITING VEHICLE SPECIFICATIONS
With CONSULT
Ignition switch ON.
Select "ELECTRIC SHIFTER".
Select "Replace ECU"
Perform the work according to the procedure displayed in CONSULT.
GO TO 2.
CHECKING THE SELF-DIAGNOSIS RESULT
With CONSULT
Check the DTC.
Is the DTC detected?
YES>>Check the detected DTC. Refer to DTC Index.
NO>>WORK END
Was this page helpful?