Torque Converter Clutch Point Learning
Descripton
TCM memorizes a torque converter clutch meet point, and this enables accurate control.
Torque converter clutch point learning must be performed when the following operation is performed. For work procedure, refer to Work Procedure.
Replacing control valve & TCM
Replacing torque converter
Work Procedure
CHECK DTC
With CONSULT
Start the engine.
Check DTC of all systems.
Is any DTC detected.
YES>>Check DTC detected item.
NO>>GO TO 2.
PERFORM TORQUE CONVERTER CLUTCH POINT LEARNING
With CONSULT
Check that the A/T fluid temperature is in the range of 60 °C to 100 °C.
Check that the engine coolant temperature is in the range of 70 °C to 110 °C.
Turn off air conditioner.
Apply the parking brake.
Release the accelerator pedal, depress the brake pedal and stop the vehicle completely.
Shift to the D position.
Select “Work supports” in “TRANSMISSION”.
Select "Torque converter clutch point learning".
Perform learning according to the CONSULT display.
WORK END