Engine Control System MR16DDT
Malfunction indicator lamp
In this manual: Engine Control System MR16DDT
~1min read
Component Function Check
1.CHECK MIL FUNCTION 1. Turn ignition switch ON.2. Check that MIL lights up.
Is the inspection result normal? YES >> INSPECTION END NO >> Proceed to EC-436, "Diagnosis Procedure".
Diagnosis Procedure INFOID:0000000006547250 1.CHECK DTCCheck that DTC UXXXX is not displayed.
Is the inspection result normal? YES >> GO TO 2.
NO >> Perform trouble diagnosis for DTC UXXXX.
2.CHECK DTC WITH METERRefer to MWI-23, "CONSULT-III Function".
Is the inspection result normal? YES >> GO TO 3.
NO >> Perform trouble diagnosis for DTC indicated.
3.CHECK INTERMITTENT INCIDENTRefer to GI-42, "Intermittent Incident".
Is the inspection result normal? YES >> Replace combination meter. Refer to MWI-69, "Removal and Installation".
NO >> Repair or replace error-detected parts.
Was this page helpful?