Cruise Control & Driver Assistance

C1a03-29 Vhcl Speed Se Circ

8steps
~48min
3/5difficulty
Done 0 of 8
DTC Description

DTC DETECTION LOGIC

DTC No.

CONSULT screen items

(Trouble diagnosis content)
DTC detection condition
C1A03-29

VHCL SPEED SE CIRC

(Nissan Murano Vehicle speed sensor circuit)
Diagnosis condition
  • When engine is running

  • When MAIN switch of ICC system is ON

Signal (terminal) —
Threshold If the Nissan Murano vehicle speed signal (wheel speed) from ABS actuator and electric unit (control unit) and the CVT vehicle speed sensor signal (output shaft revolution signal) from TCM, received by the ADAS control unit via CAN communication, are inconsistent
Diagnosis delay time 1 second or less

POSSIBLE CAUSE

  • Wheel speed sensor

  • ABS actuator and electric unit (control unit)

  • Nissan Murano Vehicle speed sensor CVT (output speed sensor)

  • TCM

  • ADAS control unit

FAIL-SAFE

The following systems are canceled:

  • Vehicle-to-vehicle distance control mode

  • Automatic Emergency Braking (AEB) with pedestrian detection

  • Automatic Emergency Braking (AEB)

  • Intelligent Forward Collision Warning (I-FCW)

  • Lane Departure Warning (LDW)

  • Intelligent Lane Intervention (I-LI)

  • Blind Spot Warning (BSW)

  • Rear Cross Traffic Alert (RCTA)

  • Rear Automatic Braking (RAB)

Confirmation Procedure

CHECK DTC PRIORITY

If DTC “C1A03–29” is displayed with DTC “U1000–01” or “C1A04–97”, first diagnose the DTC “U1000–01” or “C1A04–97”.

Is applicable DTC detected?

YES>>

Perform diagnosis of applicable.

  • U1000–01: Refer to DTC Description.

  • C1A04–97: Refer to DTC Description.

NO>>

GO TO 2.

PERFORM DTC CONFIRMATION PROCEDURE

CONSULT

  1. Start the engine.

  2. Turn the MAIN switch of ICC system ON.

  3. Drive the Nissan Murano vehicle at 30 km/h or more.

  4. Stop the Nissan Murano vehicle.

  5. Perform “All DTC Reading”.

  6. Check if the “C1A03–29” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS”.

Is “C1A03–29” detected as the current malfunction?

YES>>

Refer to DTC Diagnosis Procedure.

NO>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO>>

Confirmation after repair: Inspection End

DTC Diagnosis Procedure

CHECK DTC PRIORITY

If DTC “C1A03–29” is displayed with DTC “U1000–01” or “C1A04–97”, first diagnose the DTC “U1000–01” or “C1A04–97”.

Is applicable DTC detected?

YES>>

Perform diagnosis of applicable.

  • U1000–01: Refer to DTC Description.

  • C1A04–97: Refer to DTC Description.

NO>>

GO TO 2.

CHECK TCM SELF-DIAGNOSIS RESULTS

CONSULT

  1. Perform “All DTC Reading”.

  2. Check if any DTC is detected in “Self Diagnostic Result” of “TRANSMISSION”.

Is any DTC detected?

YES>>

Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.

NO>>

GO TO 3.

CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF-DIAGNOSIS RESULTS

CONSULT

Check if any DTC is detected in “Self Diagnostic Result” of “ABS”.

Is any DTC detected?

YES>>

Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.

NO>>

Replace the ADAS control unit. Refer to Removal and Installation.