Cruise Control & Driver Assistance

C1b03-4b Cam Abnrml Tmp Detct

9steps
~54min
2/5difficulty
Done 0 of 9
DTC Description

DTC DETECTION LOGIC

DTC No.

CONSULT screen items

(Trouble diagnosis content)
DTC detection condition
C1B03-4B

CAM ABNRML TMP DETCT

(Camera abnormal temperature detect)
Diagnosis condition
  • When engine is running

  • When I-LI system is ON

Signal (terminal) —
Threshold Temperature around lane camera unit is excessively high
Diagnosis delay time 1 second or less

POSSIBLE CAUSE

  • Interior room temperature is excessively high

  • ADAS control unit

FAIL-SAFE

The following systems are canceled:

  • Lane Departure Warning (LDW)

  • Intelligent Lane Intervention (I-LI)

  • Blind Spot Warning (BSW)

  • Rear Cross Traffic Alert (RCTA)

  • Traffic Sign Recognition (TSR)

Confirmation Procedure

DTC CONFIRMATION PROCEDURE

PERFORM DTC CONFIRMATION PROCEDURE

CONSULT

  1. Start the engine.

  2. Turn the I-LI system ON.

  3. Perform “All DTC Reading”.

  4. Check if the “C1B03–4B” is detected as the current malfunction in self-diagnosis results of “ICC/ADAS”.

Is “C1B03–4B” detected as the current malfunction?

YES>>

Refer to DTC Description.

NO>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO>>

Confirmation after repair: Inspection End

DTC Diagnosis Procedure

CHECK LANE CAMERA UNIT SELF-DIAGNOSIS RESULTS

CONSULT

  1. Perform “All DTC Reading”.

  2. Check if the “C1B00–4B” is detected in “Self Diagnostic Result” of “LANE CAMERA”

Is “C1B00–4B” detected?

YES>>

Refer to DTC Index.

NO>>

GO TO 2.

CHECK ADAS CONTROL UNIT SELF-DIAGNOSIS RESULTS

CONSULT

  1. Erase all self-diagnosis results.

  2. Perform “All DTC Reading”.

  3. Check if the “C1B03-4B” is detected in “Self Diagnostic Result” of “ICC/ADAS”

Is “C1B03-4B” detected?

YES>>

Replace the ADAS control unit. Refer to Removal and Installation.

NO>>

Inspection End