C1a04-97 Abs/tcs/vdc Circ
DTC DETECTION LOGIC
| DTC No. | CONSULT screen items (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1A04-97 | ABS/TCS/VDC CIRC (ABS/TCS/VDC circuit) |
Diagnosis condition |
|
|
| Signal (terminal) | — | |||
| Threshold | If a malfunction occurs in the VDC/TCS/ABS system | |||
| Diagnosis delay time | 60 seconds or more | |||
POSSIBLE CAUSE
ABS actuator and electric unit (control unit)
FAIL-SAFE
The following systems are canceled:
Vehicle-to-vehicle distance control mode
Conventional (fixed speed) cruise control mode
Automatic Emergency Braking (AEB) with pedestrian detection
Automatic Emergency Braking (AEB)
Intelligent Forward Collision Warning (I-FCW)
Lane Departure Warning (LDW)
Intelligent Lane Intervention (I-LI)
Blind Spot Warning (BSW)
Rear Cross Traffic Alert (RCTA)
Rear Automatic Braking (RAB)
CHECK DTC PRIORITY
If DTC “C1A04–97” is displayed with DTC “U1000–01”, first diagnose the DTC “U1000–01”.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Description.
NO>>GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Start the engine.
Turn the MAIN switch of ICC system ON.
Perform “All DTC Reading”.
Check if the “C1A04–97” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS”.
Is “C1A04–97” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End
CHECK DTC PRIORITY
If DTC “C1A04–97” is displayed with DTC “U1000–01”, first diagnose the DTC “U1000–01”.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Description.
NO>>GO TO 2.
CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF-DIAGNOSIS RESULTS
CONSULT
Check if any DTC is detected in “Self Diagnostic Result” of “ABS”.
Is any DTC detected?
YES>>Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.
NO>>Replace the ADAS control unit. Refer to Removal and Installation.