Cruise Control & Driver Assistance

C1b88-13 Motor Circuit

5steps
~30min
2/5difficulty
Done 0 of 5
DTC Description

DTC DETECTION LOGIC

DTC No.

CONSULT screen items

(Trouble diagnosis content)
DTC detection condition
C1B88-13

MOTOR CIRCUIT

(Motor circuit)
Diagnosis condition When engine is running
Signal (terminal) —
Threshold ADAS control unit detects motor circuit open.
Diagnosis delay time 2 seconds or more

POSSIBLE CAUSE

  • Motor circuit

  • ADAS control unit

FAIL-SAFE

None

DTC CONFIRMATION PROCEDURE

CHECK DTC PRIORITY

CONSULT

If DTC “C1B88-13” is displayed with DTC “U1000-01”, first diagnose the DTC “U1000-01”.

Is applicable DTC detected?

YES>>

Perform diagnosis of applicable. Refer to DTC Description.

NO>>

GO TO 2.

PERFORM DTC CONFIRMATION PROCEDURE

  1. Start the engine.

  2. Operate the I-LI system and drive.

  3. Stop the Nissan Murano vehicle.

  4. Perform “All DTC Reading” with CONSULT.

  5. Check if “C1B88-13” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS”.

Is “C1B88-13” detected as the current malfunction?

YES>>

Refer to Diagnosis Procedure.

NO>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO>>

Confirmation after repair: Inspection End.

Diagnosis Procedure

STEERING VIBRATION MOTOR CIRCUIT

Check the steering vibration motor circuit. Refer to Component Function Check.

Is the inspection result normal?

YES>>

Replace the ADAS control unit. Refer to Removal and Installation.

NO>>

Repair or replace malfunctioning parts.