Cruise Control & Driver Assistance

U1010-49 Control Unit (can)

7steps
~42min
2/5difficulty
Done 0 of 7
DTC Description

CAN controller controls the communication of CAN communication signal and the error detection.

DTC DETECTION LOGIC

DTC No.

CONSULT screen items

(Trouble diagnosis content)
DTC detection condition
U1010-49

CONTROL UNIT (CAN)

[Control unit (CAN)]
Diagnosis condition
  • When engine is running

  • When MAIN switch of ICC system is ON

Signal (terminal) —
Threshold If ADAS control unit detects malfunction by CAN controller initial diagnosis
Diagnosis delay time 1 second or less

POSSIBLE CAUSE

ADAS control unit

FAIL-SAFE

The following systems are canceled:

  • Automatic Emergency Braking (AEB) with pedestrian detection

  • Automatic Emergency Braking (AEB)

  • Intelligent Forward Collision Warning (I-FCW)

  • Lane Departure Warning (LDW)

  • Intelligent Lane Intervention (I-LI)

  • Blind Spot Warning (BSW)

  • Rear Cross Traffic Alert (RCTA)

  • Rear Automatic Braking (RAB)

  • Traffic Sign Recognition (TSR)

  • Intelligent Drive Alertness (I-DA)

Confirmation Procedure

DTC CONFIRMATION PROCEDURE

PERFORM DTC CONFIRMATION PROCEDURE

CONSULT

  1. Start the engine.

  2. Turn the MAIN switch of ICC system ON.

  3. Perform “All DTC Reading”.

  4. Check if the “U1010–49” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS”.

Is “U1010–49” detected as the current malfunction?

YES>>

Refer to DTC Diagnosis Procedure.

NO>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO>>

Confirmation after repair: Inspection End

DTC Diagnosis Procedure

PERFORM DTC CONFIRMATION PROCEDURE

CONSULT

  1. Turn the MAIN switch of ICC system ON.

  2. Perform “All DTC Reading”.

  3. Check if the “U1010–49” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS”.

Is “U1010–49” detected as the current malfunction?

YES>>

Replace the ADAS control unit. Refer to Removal and Installation.

NO>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO>>

Confirmation after repair: Inspection End