U1321-55 Configuration
DTC DETECTION LOGIC
| DTC No. | CONSULT screen items (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| U1321–55 | CONFIG UNFINISHED (Congifuration unfinished) |
Diagnosis condition |
|
|
| Signal (terminal) | — | |||
| Threshold | The Nissan Murano vehicle specifications of ADAS control unit is incomplete. | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
ADAS control unit not configured
FAIL-SAFE
The following systems are canceled:
Vehicle-to-vehicle distance control mode
Conventional (fixed speed) cruise control mode
Automatic Emergency Braking (AEB) with pedestrian detection
Automatic Emergency Braking (AEB)
Intelligent Forward Collision Warning (I-FCW)
Lane Departure Warning (LDW)
Intelligent Lane Intervention (I-LI)
Blind Spot Warning (BSW)
Rear Cross Traffic Alert (RCTA)
Rear Automatic Braking (RAB)
Traffic Sign Recognition (TSR)
Intelligent Drive Alertness (I-DA)
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Start the engine.
Perform “All DTC Reading” mode.
Check if “U1321–55” is detected as the current malfunction in “Self Diagnostic Result” mode of “ICC/ADAS”.
Is “U1321–55” detected as the current malfunction?
YES>>Refer to Diagnosis Procedure.
NO>>Inspection End.
PERFORM CONFIGURATION OF ADAS CONTROL UNIT
Perform configuration of ADAS control unit when DTC “U1321–55” is detected.
>>Perform configuration of ADAS control unit. Refer to Work Procedure.