Cruise Control & Driver Assistance

C1b5d-97 Feb Ope Count Limit

7steps
~42min
2/5difficulty
Done 0 of 7
DTC Description

DTC DETECTION LOGIC

DTC

CONSULT screen items

(Trouble diagnosis content)
DTC detection condition
C1B5D-97

FEB OPE COUNT LIMIT

(Forward Emergency Braking operation count limit)
Diagnosis condition When ignition switch is ON
Signal (terminal) —
Threshold Automatic Emergency Braking system operated 3 times within ignition switch ON.
Diagnosis delay time 1 second or less

POSSIBLE CAUSE

  • Automatic Emergency Braking system operated 3 times within ignition switch ON.

  • ADAS control unit

FAIL-SAFE

The following systems are canceled:

  • Vehicle-to-vehicle distance control mode

  • Conventional (fixed speed) cruise control mode

  • Automatic Emergency Braking (AEB) with pedestrian detection

  • Automatic Emergency Braking (AEB)

  • Intelligent Forward Collision Warning (I-FCW)

  • Blind Spot Warning (BSW)

  • Rear Cross Traffic Alert (RCTA)

Confirmation Procedure

PERFORM DTC CONFIRMATION PROCEDURE

CONSULT

  1. Start the engine.

  2. Perform “All DTC Reading”.

  3. Check if the “C1B5D-97” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS”.

Is “C1B5D-97” detected as the current malfunction?

YES>>

Refer to DTC Diagnosis Procedure.

NO>>

To check malfunction symptom before repair: Refer to Intermittent Incident

NO>>

Confirmation after repair: Inspection End

DTC Diagnosis Procedure

DTC CHECK SELF-DIAGNOSIS RESULTS

CONSULT

  1. Turn ignition switch OFF.

  2. Turn ignition switch ON.

  3. Perform “All DTC Reading”.

  4. Check if the “C1B5D-97” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS”.

Is C1B5D-97 detected as current malfunction?

YES>>

Replace the ADAS control unit. Refer to Removal and Installation.

NO>>

Perform ICC system action test. Refer to Work Procedure.