Exterior Lighting

Disassembly

~1min read

DISASSEMBLY

PRECAUTION / NOTICE / HINT

HINT:

  • Repeat the same procedure for the right side and the left side.
  • The following procedure applies to the left side.

PROCEDURE

1. REMOVE REAR COMBINATION LIGHT LED

(a) Disconnect the connector.

Remove in this direction

(b) Remove the screw.

(c) Turn the rear combination light LED as shown in the illustration to remove it.

2. REMOVE REAR TURN SIGNAL LIGHT BULB

(a) Turn the rear combination light socket and wire with the rear turn signal light bulb as shown in the illustration to disconnect the assembly.

Remove in this direction

(b) Remove the rear turn signal light bulb from the rear combination light socket and wire.

Remove in this direction

3. REMOVE REAR SIDE MARKER LIGHT BULB

(a) Turn the rear combination light socket and wire with the rear side marker light bulb as shown in the illustration to disconnect the assembly.

Remove in this direction

(b) Remove the rear side marker light bulb from the rear combination light socket and wire.

Remove in this direction

4. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE

(a) Release the latch.

(b) Disconnect the connector to remove the rear combination light socket and wire.