Exterior Lighting

Reassembly

~1min read

REASSEMBLY

PRECAUTION / NOTICE / HINT

HINT:

  • Repeat the same procedure for the right side and the left side.
  • The following procedure applies to the left side.

PROCEDURE

1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE

(a) Connect the connector.

(b) Engage the latch to install the rear combination light socket and wire.

2. INSTALL REAR SIDE MARKER LIGHT BULB

(a) Install the rear side marker light bulb into the rear combination light socket and wire.

Install in this direction

(b) Turn the rear combination light socket and wire with the rear side marker light bulb as shown in the illustration to connect the assembly.

Install in this direction

3. INSTALL REAR TURN SIGNAL LIGHT BULB

(a) Install the rear turn signal light bulb into the rear combination light socket and wire.

Install in this direction

(b) Turn the rear combination light socket and wire with the rear turn signal light bulb as shown in the illustration to connect the assembly.

Install in this direction

4. INSTALL REAR COMBINATION LIGHT LED

(a) Turn the rear combination light LED as shown in the illustration to install it.

Install in this direction

(b) Install the screw.

(c) Connect the connector.