Removal
REMOVAL
PRECAUTION / NOTICE / HINT
HINT:
- Repeat the same procedure for the right side and the left side.
- The following procedure applies to the left side.
PROCEDURE
1. REMOVE REAR COMBINATION LIGHT COVER
(a) Release the claws to remove the rear combination light cover as shown in the illustration.
![]() |
Remove in this direction |
2. REMOVE REAR COMBINATION LIGHT ASSEMBLY
(a) Apply protective tape around the rear combination light assembly as shown in the illustration.
![]() |
Protective tape |
(b) Remove the 2 screws.
(c) Pull the rear combination light assembly toward the rear of the vehicle as shown in the illustration to release the clip, guide and pin and separate the rear combination light assembly.
NOTICE:
To prevent the rear combination light assembly from falling when releasing the pins and guides, hold the rear combination light assembly lightly.
*a |
Guide |
*b |
Pin |
![]() |
Remove in this direction |
(d) Disconnect the connector to remove the rear combination light assembly. |
![]() |
.png)
.png)
.png)