Exterior Lighting

Reassembly

~1min read

REASSEMBLY

PRECAUTION / NOTICE / HINT

HINT:

  • Repeat the same procedure for the right side and the left side.
  • The following procedure applies to the left side.

PROCEDURE

1. INSTALL FRONT SIDE MARKER LIGHT BULB (for USA and Canada)

(a) Install the front side marker light bulb into the front side marker light socket.

Install in this direction

(b) Turn the front side marker light socket with the front side marker light bulb as shown in the illustration to install them together.

Install in this direction

2. INSTALL FRONT TURN SIGNAL LIGHT BULB

(a) Turn the front turn signal light bulb to install it into the front turn signal light socket as shown in the illustration.

Install in this direction

(b) Turn the front turn signal light socket with the front turn signal light bulb as shown in the illustration to install the assembly.

Install in this direction

3. INSTALL HEADLIGHT SOCKET COVER

(a) Install the headlight socket cover onto the headlight unit assembly.

4. INSTALL NO. 1 HEADLIGHT BULB

(a) Orient the No. 1 headlight bulb in the direction indicated by the arrow in the illustration, and install it.

Install in this direction

NOTICE:

Do not touch the glass of the No. 1 headlamp bulb.

5. INSTALL HEADLIGHT PROTECTOR

(a) Install a new headlight protector.