Repair
REPAIR
PRECAUTION / NOTICE / HINT
HINT:
- Repeat the same procedure for the right side and the left side.
- The following procedure applies to the left side.
- If the mounting surface of the headlight assembly is damaged, use the replacement retainer to reduce repair costs.
- Check that the headlight assembly is not damaged.
PROCEDURE
1. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER
(a) Cut the shaded part shown in the illustration and smooth it with sandpaper. HINT: After cutting the part, position the upper headlight protector retainer against the bosses. If the old bracket interferes with installation of the replacement retainer, gradually file it down. |
![]() |
(b) Install the upper headlight protector retainer with the screw. |
![]() |
2. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER NO. 2
(a) Cut the shaded part shown in the illustration and smooth it with sandpaper. HINT: After cutting the part, position the upper headlight protector retainer No. 2 against the bosses. If the old bracket interferes with installation of the replacement retainer, gradually file it down. |
![]() |
(b) Install the upper headlight protector retainer No. 2 with the 2 screws. |
![]() |
3. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER NO. 3
(a) Cut the shaded part shown in the illustration and smooth it with sandpaper. HINT: After cutting the part, position the upper headlight protector retainer No. 3 against the bosses. If the old bracket interferes with installation of the replacement retainer, gradually file it down. |
![]() |
(b) for Type A:
(1) Install the upper headlight protector retainer No. 3 with the 2 screws. |
![]() |
(c) for Type B:
(1) Install the upper headlight protector retainer No. 3 with the 2 screws. |
![]() |






