Exterior Lighting

Installation

~1min read
0102030405086N·mlb·ft
Tightening torque found on this page

INSTALLATION

PROCEDURE

1. INSTALL REAR LEFT HEIGHT CONTROL SENSOR SUB-ASSEMBLY

(a) Engage the hook.

*a

Clip

*b

Hook

(b) Install the rear left height control sensor sub-assembly with the 2 bolts.

Torque:

8 N·m {82 kgf·cm, 71 in·lbf}

(c) Engage the clip.

(d) Connect the connector.

2. INSTALL REAR WHEEL (for left side)

Click here

3. PERFORM INITIALIZATION

Click here

4. CHECK HEADLIGHT AIM

Click here