Fail-Safe Table
FAIL-SAFE TABLE
DTC | Suspected Area | Parking brake warning light (red) | Brake System Warning Light (Yellow) | Safety mode cancellation conditions |
|---|---|---|---|---|
C13A5 |
Motor Current Control Malfunction |
Normal |
Comes on |
After returning to normal, turn the ignition switch again. |
C13A6 |
Open or short circuit in the motor |
Normal*1 |
Comes on |
After returning to normal, turn the ignition switch again. |
C13A7 |
Actuator Assembly Malfunction (jamming, slipping, repeated slipping) |
Flashes |
Comes on |
After returning to normal, clear the DTCs |
C13AA |
Electric Parking Brake High Temperature |
Flashes |
Does not come on |
After 1 minute |
C13B0 |
ECU Malfunction |
Normal (flashes when there is an EEPROM malfunction) |
Comes on |
After returning to normal, turn the ignition switch again. |
C13B4 |
Open or short circuit in the Electric Parking Brake Switch |
Normal |
Comes on |
After returning to normal, turn the ignition switch again. |
- *1: The parking brake indicator flashes (red) when the Electric Parking Brake Switch Assembly is pulled or pushed.