Guide Wheels, Tyres - General Information
Marking on the tyre sidewall
In this manual: Guide Wheels, Tyres - General Information
28steps
~168min
4/5difficulty
Done 0 of 28
Markings on tyre sidewall, standard tyre
Example: Continental ContiPremiumContact 2

- Size designation
- z. B. 205/55 R 16
- Position of tread wear indicators TWI (Tread Wear Indicator)
- Manufacturer (trade name)
- Construction
- Radial - radial ply construction in the carcass
- Tubeless - marking for tubeless tyres
- Load index/speed symbol
- z. B. 91
- z. B. H
- Prescribed direction of rotation/fitting direction of the tyre
- Maximum permissible load
- Data for North America only
- Maximum permissible tyre pressure
- Data for North America only
- Number of plies in the tread centre and in the sidewall, and material specification
- E-number = approval mark
- Tyre meets European directives
- Manufacturing code/date of manufacture
- Identification number for manufacturing plant, tyre size and tyre version
- Tyre age/date of manufacture
- DOT - Department of Transportation
- Tyre meets the requirements of the American transport authorities
- Marking for Brazil, INMETRO
- Marking for China, CCC
- Country of manufacture
- e.g. manufactured in Germany (Made in Germany)
- Safety information for use or fitting of the tyre
- Relative life expectancy - tread wear resistance
- based on a US-specific standard test
- Wet braking performance rating A, B or C
- according to US-specific test
- Temperature resistance rating A, B or C
- according to US-specific test
- Marking for run-flat tyres
- e.g. Self Supporting Runflat
- Marking for run-flat tyres
- Tread pattern designation
- e.g. ContiPremiumContact
Markings on tyre sidewall, run-flat tyre (PAX)
Compared with conventional tyres, run-flat tyres (PAX) have different markings on the sidewall. This allows these tyres to be clearly identified.
Tyre markings on run-flat tyre (PAX)
- 245 - Tyre width in millimetres
- 690 - Outer diameter in millimetres
- R - Radial construction
- 500 - Nominal diameter of the standardised rim seat
- A - Construction type index for the system technology of run-flat (PAX) wheels (A-"asymmetric"), because the two rim seats have different diameters
- 99 - Load index for which this tyre is approved (99 = 1550 kg)
- Y - Speed symbol ("Y" corresponds to a maximum permitted speed of 300 km/h)

Tyre dimension
Explanation of the tyre dimension

- Tyre width
- Aspect ratio in %
- Code letter for tyre construction "R" (means radial)
- Rim diameter designation
- Load index (LI)
- Speed symbol
- Winter tyre/designation also used for all-season tyres
Load index (LI)
The load index is shown on the sidewall of the tyre. It indicates the maximum load the tyre can carry.
The load index is part of the tyre size designation, e.g. 195/65 R 15 91T. It is specified on the tyre as a code according to the ETRTO standard. The table below shows the load indices with the corresponding load capacity of the tyres.


Speed symbol
Speed symbols/maximum speed

Winter tyres with speed symbol "V"
Was this page helpful?