Hyundai Accent Quiz
Brake System

Inspection and Adjustment of Brake Pedal Position

In this manual: Brake System
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read

PROCEDURE

1. Поверните выключатель стоп–сигналов до получения требуемого зазора между выключателем

1. Turn the stop lamp switch until the required clearance between the switch and the brake pedal is obtained, then tighten the switch lock nut.
Clearance between brake pedal and stop lamp switch: 0.5–1.0 mm

2. С выключенным двигателем нажмите педаль тормоза несколько раз для того, чтобы

2. With the engine off, depress the brake pedal several times to eliminate any play in the system. Depress the brake pedal by hand until resistance is felt, and measure the brake pedal free play.
Brake pedal free play: 3–8 mm

3. Запустите двигатель и нажмите на педаль тормоза усилием 50 кг, и измерьте

3. Start the engine, depress the brake pedal with a force of 50 kg, and measure the distance from the floor to the center of the brake pedal pad.
Minimum brake pedal height from floor: 70 mm
When the pedal is fully depressed without brake fluid: 50 mm

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.