Starter

Starter

1 – front cover;
2 – front bushing;
3 – cover;
4 – bolt;
5 – magnetic switch solenoid;
6 – plunger;
7 – spring;
8 – gasket;
9 – shift lever;
10 – holders;
11 – spring;
12 – plug;
13 – washer;
14 – thrust ring;
15 – stopper;
16 – overrunning clutch;
17 – rotor;
18 – shims;
19 – stator;
20 – brush holder;
21 – rear cover;
22 – rear bushing;
23 – bolt;
24 – screw.

Starter Mounting Bolts

1 – bolt, 9.8–16 N·m;
2 – starter;
3 – bolt, 26–33 N·m.

Removal and installation

PROCEDURE

1. Disconnect the cable from the negative battery terminal.
2. Disconnect the speedometer cable.
3. Disconnect the connector and the wire from the starter terminal.
4. Remove the bolts and remove the starter.
5. Install in the reverse order of removal.