Instrument Panel Fuse Replacement

1. Turn the ignition off.
2. Turn off all other switches.
3. Open the fuse panel cover.
4. Refer to the label on the inside of the fuse panel cover to locate the corresponding fuse.

5. Pull the suspected fuse straight out. Use the puller tool provided in the engine compartment fuse panel.

6. Check the removed fuse. Replace it if it is blown. Spare fuses are provided in the instrument panel fuse panel (or the engine compartment fuse panel).

7. Insert a new fuse of the same rating and make sure it fits firmly in the clips. If it fits loosely, consult an authorized HYUNDAI service center. In an emergency, if you do not have a spare fuse, use a fuse of the same rating from a circuit you do not need to operate the vehicle, such as the cigar lighter fuse.

If the headlights or other electrical components do not work and the fuses are not blown, check the fuse panel in the engine compartment. If a fuse is blown, it must be replaced with one of the same rating.

Fuse Switch

Always set the fuse switch to the ON position.

If the switch is set to the OFF position, some items, such as the audio system and digital clock, must be reset, and the smart key may not operate properly.

Information

If the fuse switch is in the OFF position, the above message will appear.

NOTICE

• Always set the fuse switch to the ON position while driving the vehicle.
• Do not move the fuse switch repeatedly. The fuse switch may be damaged.