AutoPark

AutoPark is an optional feature that helps place the vehicle in PARK in the situations described on the following pages. It is a backup system and must not be relied upon as the primary method of shifting the vehicle into PARK.

The conditions under which AutoPark will engage are described on the following pages.

• Driver inattention may result in failure to place the vehicle in PARK. ALWAYS PERFORM A VISUAL CHECK to confirm that the vehicle is in PARK by verifying that a solid (not flashing) "P" is displayed in the instrument cluster and on the gear selector. If the "P" indicator is flashing, the vehicle is not in PARK. As an additional precaution, always apply the parking brake when exiting the vehicle.
• AutoPark is an optional feature. It is not designed to replace the need to shift the vehicle into PARK. It is a backup system and must not be relied upon as the primary method of shifting the vehicle into PARK.

If the vehicle is not in PARK and the driver turns off the engine, the vehicle may AutoPark.

AutoPark will engage when all of the following conditions are met:

• The vehicle is equipped with an eight-speed automatic transmission
• The driver's door is open or removed and the driver is not in the seat (seat cushion sensor detects no driver)
• The vehicle is not in PARK
• Vehicle speed 0 km/h
• The ignition is switched from RUN to OFF

NOTE:

For vehicles equipped with Keyless Enter-N-Go, the engine will turn off and the ignition key will move to the ACC position.

If the vehicle is not in PARK and the driver exits the vehicle with the engine running, the vehicle may AutoPark.

AutoPark will engage when all of the following conditions are met:

• The vehicle is equipped with an eight-speed automatic transmission
• The driver's door is open or removed and the driver is not in the seat (seat cushion sensor detects no driver)
• The vehicle is not in PARK
• The driver's door is removed
• Vehicle speed is 1.2 mph (1.9 km/h) or less
• The driver's seat belt is not fastened
• The brake pedal is not depressed

The message " AutoPark Enabled, Shift to P, Then Shift to Gear " will be displayed in the instrument cluster.

NOTE:

In some cases, the ParkSense graphic will be displayed in the instrument cluster. In these cases, the gear selector must be returned to the "P" position before selecting the desired gear.

If the driver shifts into PARK while the vehicle is moving, the vehicle may AutoPark.

AutoPark will engage ONLY when the vehicle speed is 1.2 mph (1.9 km/h) or less.

The message " Vehicle Speed Too High to Shift to P " will be displayed in the instrument cluster if the vehicle speed is above 1.2 mph (1.9 km/h).

4WD LOW

AutoPark will be disabled when the vehicle is operated in 4WD Low.

The message " AutoPark Disabled " will be displayed in the instrument cluster.

Additional customer warnings will be given when both of these conditions are met:

• The vehicle is not in PARK
• The driver's door is open

The message " AutoPark Not Engaged " will be displayed in the instrument cluster. The warning chime will continue until the vehicle is shifted into PARK or the driver's door is closed.

ALWAYS PERFORM A VISUAL CHECK that the vehicle is in PARK by looking for the "P" in the instrument cluster display and on the gear selector. As an additional precaution, always apply the parking brake when exiting the vehicle.